The best office chair is the one that fits you and your desk, not the one with the longest feature list. Look for a seat whose height you can adjust so your feet rest flat, a seat depth that leaves a small gap behind your knees, a backrest that supports the curve of your lower back, and armrests that let your shoulders relax.
Office ergonomics guidance in Canada, such as the material published by the Canadian Centre for Occupational Health and Safety (CCOHS) and university health and safety offices, comes back to the same idea: adjustability. People differ in height, leg length and the way they work, so a chair that can be adjusted in several ways will suit more bodies than a fixed design, however good it looks in a photo.
If you only sit for an hour now and then, a simple task chair is enough. If you draw, design or type for most of the day, it is worth paying more attention to the adjustments described below and checking them on the product page before you order.
The adjustments that matter most
| Adjustment | What to look for | Why it matters |
|---|---|---|
| Seat height | Gas lift with a range that covers your desk height | Feet flat on the floor, thighs roughly level |
| Seat depth | Sliding seat, or a seat that is not too deep for you | Leaves room behind the knees, supports the thighs |
| Backrest and lumbar | Lumbar support, ideally adjustable in height | Supports the natural curve of the lower back |
| Tilt | Tilt lock and tension control | Lets you lean back and still feel supported |
| Armrests | Height adjustable or flip-up | Shoulders relaxed, chair can slide close to the desk |
| Base | Five legs with casters | Stable and easy to move |
You will find most of these features described in the office chair range. Product descriptions often list them as “pneumatic seat height adjustment”, “locking tilt” or “built-in lumbar support”. The same checks apply to compact task chairs, high-back manager chairs and gaming chairs: style matters less than whether the chair adjusts to you.
Seat height and seat depth
Start with seat height. When you sit back in the chair with your feet flat on the floor, your thighs should be roughly horizontal and your knees at about the same level as your hips. Check the minimum and maximum seat height in the specifications, then measure your own desk. A typical desk is around 71 to 76 cm (28 to 30 inches) high, but older and custom desks vary.
If you are shorter and need to raise the seat to reach the desk, your feet may no longer reach the floor. A footrest solves that. The ergonomic footrest in the range has an adjustable tilt and a non-slip surface, which is the kind of detail to look for.
Seat depth is easy to overlook. Sit all the way back: many ergonomics guides suggest you should be able to fit about two to four fingers between the front edge of the seat and the back of your knees. A seat that is too deep pushes into the back of the legs or forces you to perch on the front edge, away from the backrest. Taller people often find a deeper seat more comfortable, and some chairs have a seat that slides forward and back.
Backrest, lumbar support and tilt
The backrest should follow the shape of your spine and give firm support in the small of your back. A chair with lumbar support that moves up and down lets you put that support where your back actually curves, rather than where the designer guessed it would be.
Mesh backs, such as the grey ergonomic task chair with a mesh back and lumbar support, let air through and suit warm rooms. Padded backs in fabric or faux leather feel softer but can get warm over a long day.
Tilt matters if you like to lean back while reading drawings or thinking. Look for:
- A tilt lock so you can fix the backrest upright when you work at the keyboard.
- Tension control so the chair resists your weight rather than tipping back too easily.
- Synchro tilt on some chairs, where the seat and backrest move together at different angles.
Armrests and the desk
Armrests help you rest your arms between tasks, but they can also stop you from pulling the chair close to the desk. That forces you to reach forward, which defeats the point of a good backrest. Height adjustable or flip-up arms avoid the problem. The manager chair with screen back has padded flip arms for this reason.
With your shoulders relaxed, your elbows should be close to your sides and bent at roughly a right angle when your hands are on the keyboard or drawing surface. If the armrests push your shoulders up, lower them or flip them away.
Think about the whole workstation, not just the chair. A desk with room for your legs, storage within reach and a screen at eye level all change how you sit. The office furniture section includes desks and drawer units, and office storage covers cabinets and file boxes that keep the floor around the chair clear.
Setting up the chair when it arrives
- Raise or lower the seat until your feet are flat and your thighs are level. Add a footrest if your feet do not reach the floor.
- Sit right back and check the gap behind your knees. Adjust the seat depth if you can.
- Move the lumbar support to the curve of your lower back.
- Set the armrests so your shoulders are relaxed, or flip them away.
- Lock the tilt for focused work, or set the tension so leaning back feels controlled.
- Pull the chair close to the desk and check that you can reach the keyboard, mouse and drawings without stretching.
No chair replaces moving around. Stand up, stretch and change position regularly through the day. If you have ongoing back, neck or shoulder pain, ask a doctor or physiotherapist for advice rather than relying on a new chair to fix it.
Quick checklist
- Seat height range that matches your desk.
- Seat depth that leaves a small gap behind your knees.
- Lumbar support, ideally adjustable in height.
- Tilt lock and tension control.
- Armrests that adjust or flip up.
- Five-leg base with casters suited to your floor.
- Footrest if your feet do not reach the floor.
- Measurements, weight limit and assembly details checked on the shop’s page.
Common questions
How much should I spend on an office chair?
Spend according to how long you sit. For occasional use a basic task chair is fine. For full working days, put the money into adjustability: seat height, seat depth, lumbar support and armrests matter more than leather, branding or extra padding.
Is a mesh back or a padded back better?
Neither is better for everyone. Mesh breathes and suits warm rooms, while padding feels softer. What matters more is whether the backrest supports your lower back and whether the chair adjusts to your size.
Do I need different casters for hard floors?
Hard nylon casters are generally designed for carpet and can mark or slide on hard floors. Many shops sell softer casters for wood, laminate and tile; check the stem size of your chair before buying replacements. For setting out the room itself, the guide to rulers, tape measures and tracing paper explains which measuring tools help.

